Thyristor module | | silicon controlled thyristor SCR manufacturer single-phase SCR | | silicon controlled function | working principle of the SCR | | silicon controlled prices

by:Positioning     2021-03-28
Thyristor module work when he and other power devices, due to its power consumption and fever, if do not take appropriate measures to this kind of heat to send out, it could cause module tube core PN junction temperature has risen sharply, causing deterioration of thyristor module features, until completely damaged. Thyristor module's power consumption is mainly composed of conduction loss, switch loss, gate loss of three parts. Under power frequency or 400 hz frequency application is the main conduction loss. Device in order to ensure the long term and reliable work, design of radiator and the choice of the ways of cooling and power semiconductor module current voltage rating of choice are equally important, don't careless! The commonly used heat radiator ways are: natural air cooling, forced air cooling, heat pipe cooling and water cooling, oil cooling, etc. View of the general principles of heat dissipation problem is: control module in the junction temperature of tube core Tj shall not exceed the rating of the product data sheet given junction temperature. In fact, silicon controlled module component junction temperature is not easy to direct measurement, so can't use it as the criterion of whether overtemperature. The temperature of the slab by controlling module ( The shell temperature Tc) To control the junction temperature is an effective method. Because the p-n junction temperature of Tj and shell temperature Tc there exists a certain temperature gradient, know the shell temperature also knew taking temperature, while higher shell temperature Tc is limited, given by the product data sheet. With the help of a temperature control switch can be easily measured by contact with the radiator in the module of base plate temperature ( Temperature sensing element should be placed in the higher temperature of the base module location) 。 From temperature control on-off measurement to shell temperature can judge whether the work of the module is normal. If the increase in the line of one or two temperature control circuit, respectively control the main loop of the fan in the open or on and off ( Stop) , can effectively guarantee the thyristor module working under rated junction temperature. It should be pointed out that, the temperature of the temperature control switch to measure surface temperature of the bottom plate is thyristor module, vulnerable to environment, the influence of air convection, the contact with the module and radiator temperature on the surface of the Tc, there are certain differences, About low several times to ten degrees) Control, so the actual temperature should be lower than of Tc value.
Yangzhou Positioning Tech. Co., Ltd are maintaining a consistent bottom-line profit and that you've shown steady growth over the past few years.
Our vision is to realize the tremendous potential of custom rectifier by providing silicon rectifier services that consistently meet our customers’ expectations.
There are ample scientific evidence of reducing the risk of silicon rectifier diode.
What Yangzhou Positioning Tech. Co., Ltd discovered was that innovation occurs when business models match up with one or more of the custom rectifier where technological advances overlap with market needs, thus resulting in growth and transformation.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...