Over-voltage breakdown is thyristor
module is one of the main reasons for the breakdown, thyristor module of overvoltage bear ability is almost no time, even in a short period of time a few milliseconds over voltage will be breakdown, so the practical application circuit, on both ends of thyristor module must be connected to the RC absorption circuit, in order to avoid various instantaneous overvoltage caused by the interference of random pulse.
If the SCR module breakdown happens often, please check the absorption circuit various components for burn out or fail.
Thyristor module flow and overheat breakdown, actually flow breakdown and overheat breakdown is the same thing.
Breakdown is current flow through the silicon controlled rectifier module thermal effect when the chip inside the chip, the chip temperature, when the temperature reaches 175 ℃ chip will be invalid and cannot be restored.
Under normal conditions of use, as long as the working current shall not exceed the rated current thyristor module is not going to happen this kind of thermal breakdown, because the flow principle of breakdown is caused by temperature, and temperature rise process needs a certain time, so the flow in a short time (
A few hundred milliseconds to several seconds)
Is generally not breakdown.
Thyristor module overheat breakdown, overheat breakdown here refers to the working current is not more than rated current thyristor module cases occurring in the course of thermal breakdown, the cause of the breakdown occurred mainly thyristor module of auxiliary cooling device caused by poor work thyristor module chip temperature lead to breakdown.
For the water, however, work, mainly check whether the water temperature is too high (
General requirements water temperature should be below 25 ℃, but the highest no more than 35 ℃)
The flow adequacy;
To use air cooling way of working, should check whether the fan revolution is normal, and the environment temperature is not too high, but neither air cooling or water cooling, if you just replace the chip when replace SCR module, when installation should pay attention to the contact area between the chip and heat sink must assure good contact, contact surface to smooth, cannot have scratches or place into the concave and convex and can not have dust, to ensure adequate and uniform pressure, especially for water-cooled thyristor module, three tensile strength of the bolt must be uniform, and regularly check and clean up the scale, scale too much can affect the cooling effect lead to breakdown of overheating.
In addition if multiple replacement chips will also influence the result of the radiator surface deformation and heat dissipation effect, if your machine an SCR module breakdown and often can't find other reasons, you should consider when replace SCR module together with the radiator replacement together.
looking for the best deal while getting a quality is usually the number-one objective for most silicon rectifier diode manufacturer.
Yangzhou Positioning Tech. Co., Ltd is one of China's biggest providers in the following categories of products: custom rectifier, silicon rectifier, silicon rectifier diode,etc. We also welcome ODM and OEM orders, and offer the highest standards of service, the cheapest deals, and the best buying experience. Get to know us at Positioning Thyristors.
Among improvements to custom rectifier, nearly half of consumers considered quality and service as the most important change a business could make in its supply chain.
Positioning is one of the top brands in their class when it comes to custom rectifier and silicon rectifier. If you check online, Positioning is often rated high and reviewed with much praise. we would be very pleased to receive your inquiry.
The engineers and developers of Yangzhou Positioning Tech. Co., Ltd are the best in their own professional way and we guarantee to provide related service to our dear customers.