Selection of rated voltage of the thyristor
module, should refer to the actual working conditions of the size of the peak voltage, and set aside a certain margin.
Detailed to introduce the next note: 1, the selection of rated current of the thyristor module, in addition to consider through the components of the average current, also should pay attention to the normal work when the size of the conduction angles, cooling ventilation conditions and other factors.
At work should also pay attention to the pipe shell temperature not to exceed their electricity flow value.
2, before using thyristor module, should use the multimeter to check thyristor module are in good condition.
Found short circuit or open circuit phenomenon, should be replaced immediately.
3, it is forbidden to use megger (
The shaking table)
Check the insulation condition of components.
More than 4, the current is 5 a thyristor module to install the radiator, and the cooling conditions stipulated in the guarantee.
In order to ensure the radiator tube good contact with the thyristor module, between them should be coated with a thin layer of organic silicone oil or silicone, to help with good heat dissipation.
5, according to the rules of the main circuit of thyristor module adopts the overvoltage and overcurrent protection device.
Above is about the thyristor module is introduced, and to prevent the thyristor module control very forward overload and reverse breakdown.
Thyristor module true experts, in order to your satisfaction, we really heart.
If interested in our thyristor module or there is doubt, welcome your consultation.
In the present growing world of emerging technology, the has demanding operation in various sectors like silicon rectifier, silicon rectifier diode, silicon rectifier and many other industries at silicon rectifier diode levels of manufacturing and designing.
During Yangzhou Positioning Tech. Co., Ltd’s existence in a market we didn’t receive any negative feedback from our customers.
silicon rectifier custom rectifier is one of the most commonly used tool for silicon rectifier diode.