MTC thyristor module | brilliant brake pipe die high-power SCR |

by:Positioning     2021-01-25
MTC thyristor module work when he and other power devices, due to its power consumption and fever, if do not take appropriate measures to this kind of heat to send out, it could cause module tube core PN junction temperature has risen sharply, the MTC thyristor module properties deteriorated, until completely damaged. MTC thyristor module's power consumption is mainly composed of conduction loss, switch loss, gate loss of three parts. Under power frequency or 400 hz frequency application is the main conduction loss. Device in order to ensure the long term and reliable work, design of radiator and the choice of the ways of cooling and power semiconductor module current voltage rating of choice are equally important, don't careless! The commonly used heat radiator ways are: natural air cooling, forced air cooling, heat pipe cooling and water cooling, oil cooling, etc. Considering the heat dissipation problem of total principle is: control of thyristor module chip junction temperature Tj shall not exceed the rating of the product data sheet given junction temperature. In fact, MTC thyristor module component junction temperature is not easy to direct measurement, so can't use it as the criterion of whether overtemperature. The temperature of the slab by controlling module ( The shell temperature Tc) To control the junction temperature is an effective method. Because the p-n junction temperature of Tj and shell temperature Tc there exists a certain temperature gradient, know the shell temperature also knew taking temperature, while higher shell temperature Tc is limited, given by the product data sheet. With the help of a temperature control switch can be easily measured by contact with the radiator in the module of base plate temperature ( Temperature sensing element should be placed in the higher temperature of the base module location) 。 From temperature control on-off measurement to shell temperature can judge whether the work of the module is normal. If the increase in the line of one or two temperature control circuit, respectively control the main loop of the fan in the open or on and off ( Stop) , can effectively guarantee the thyristor module working under rated junction temperature. It should be pointed out that, the temperature of the temperature control switch to measure is the MTC thyristor module and floor surface temperature, vulnerable to environment, the influence of air convection, contact with thyristor module and radiator temperature on the surface of the Tc, there are certain differences, About low several times to ten degrees) Control, so the actual temperature should be lower than of Tc value. MTC if interested in our MTC thyristor module or there is doubt, welcome your consultation.
Whenever the question of custom rectifier silicon rectifier is raised, one comes across the term ''.
Applied Materials’ mission is to be the leading supplier of custom rectifier worldwide-through innovation and enhancement of customer productivity with systems and service solutions.
Yangzhou Positioning Tech. Co., Ltd incorporates average length of the workweek, average growth in number of small businesses, startup per capita, average of growth of business revenues, five-year business survival rate, industry variety, entrepreneurship index and how digital a state is.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...