MTC SCR | MTC | | silicon controlled thyristor module

by:Positioning     2020-12-02
Many users in the use of MTC silicon controlled thyristor module is all don't know how to control the heating module, then by the thyristor module small make up to introduce the MTC thyristor module of the two control heating mode: 1. MTC phase-shifting trigger heating conduction Angle of silicon controlled rectifier module has been adjusted so that the voltage changes, so as to adjust the heating power; 2. Zero passage trigger heated known as solid state relay, when heated, voltage does not change, is actually a pulse on-off signal. Generally MTC are selected phase shift trigger thyristor module, however, the frequency of the phase shifting trigger for grid disturbance, power performance is outstanding, but the general industrial occasions it doesn't matter, because according to the practical experience, as long as no longer heater ipsilateral using oscilloscope kind of requirement of the power system frequency, high precision instrument will not have what matter. Also, MTC thyristor module is to reduce dynamic voltage phase shift heating, so is good to extend the service life of heating element. Zero passage trigger simple and stable, usually saves a trigger board. MTC thyristor trigger signal is usually 0 - module Or 1-5 v 5 v pulse. Do not recommend using s7-200 high speed output control. Common practice is to temperature control module, first the thermocouple or heat resistance temperature signal to PLC, PLC in the pid ( The procedure is not hard to) , 4 - output 4-20 ma signal 20 ma signal sent to MTC triggered thyristor module board, make the MTC heating power thyristor module control thyristor trigger board module. MTC thyristor module will only a little more than a rival, it is much to consider for the customer. If interested in our MTC thyristor module or there is doubt, welcome your consultation. We wholeheartedly for your service.
Positioning saves time and increases productivity because it's one of the most complete sources of business and contact information.
A detailed plan must be developed if we hope to reach your profitability goal. Once we have a certain figure in mind, Yangzhou Positioning Tech. Co., Ltd and our staff need to determine all the steps necessary to reach that goal and act on them.
With its quality certified and recognised by professional intitutions and customers, Yangzhou Positioning Tech. Co., Ltd is one of the leading providers in China.
custom rectifier has a great positive reflects from our dear customers.
Increasing consumer awareness and rising concern about improving silicon rectifier are driving the market of products.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...